CALL:86-13958851022
News

News

HomeNewsNews

How to Choose the Feeding Layout of a Counting Packing Machine

Update time:2026.11.10       Views:5

Layout One: Feeders Around the Machine (Compact Type)

In the compact layout, the vibratory bowls stand in a ring around the main packing machine, and each bowl feeds its parts over a short distance into the centre. Because nothing travels far, the complete line takes up the least floor space of the three layouts, and it is usually the first design we look at for a new project.

There is a practical ceiling: we normally plan this layout for up to seven bowls. Part size matters as much as part count — seven small bowls fit comfortably, while a set of large-diameter bowls can crowd the ring sooner. If your kit has many items, or the items are bulky, one of the conveyor layouts below will serve you better.

Choose the compact type if: floor space is tight, your kits have up to about seven items, and you want the shortest, simplest line.

Layout Two: Feeders Along a Horizontal Conveyor

When the bowls no longer fit around the machine, they move out to the sides. In this layout the bowls stand in two rows along a horizontal conveyor belt. Each bowl counts its parts onto the belt, and the belt carries everything to the packing machine at the end of the line. The belt itself can also be set at a 45-degree incline where the workshop layout asks for it.

The standard conveyor is 2 metres long and driven by a JSCC motor, and for buyers working to a limited budget it can be extended by up to 3 metres. This is the most economical of the conveyor layouts — it costs less than the inclined conveyor type. The one compromise is working height: the bowls sit relatively high on both sides of the belt, so topping them up by hand is a little less convenient than with the other two layouts.

Choose the horizontal conveyor type if: you have more bowls than a compact line can hold, budget matters, and your operators can live with a higher feeding position.

Layout Three: Feeders with an Inclined Bucket Conveyor

The third layout replaces the flat belt with an inclined bucket conveyor. The bowls discharge into buckets on the conveyor, and the buckets lift the counted parts up and into the packing machine. Lifting instead of sliding suits larger and heavier parts, and it keeps the line orderly over longer distances.

The buckets are plastic chain buckets, made in large and small sizes and chosen according to the volume of your parts; plastic chain buckets are the mainstream choice at present. For very large part volumes and longer lines, we also build a non-standard version with enlarged pulley chain buckets and a slightly different lifting method (developed with reference to the Würth project).

Choose the inclined conveyor type if: your parts are large or heavy, your volumes are high, or the line needs to run longer than a flat belt allows.

The Short Version

Layout

Bowls

Footprint

Watch out for

Compact type

Up to about 7

Smallest

Large bowls crowd the ring

Horizontal conveyor

More, in two rows

Long and narrow

Bowls sit high; manual feeding less handy

Inclined conveyor

More, with lift

Flexible, suits long lines

Higher cost than the horizontal type

Still not sure? That is normal — the right layout depends on your parts, not on a catalogue page. Send us samples of what you pack, tell us how many pieces go in a bag and what output you need, and we will draw the layout around your product.

Kally Machinery – professional manufacturer of Packing Machine

Copyright © Rui'an Kally Machinery Co.,Ltd All Rights Reserved.

Privacy Notice | Privacy Policy | XML | Sitemaps | Powered by:Otree

Please fill out the form below to start
chatting with the available agent. Thank you.
Otree

We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies.

Consent Preferences

Consent Preferences