Worth Collecting! Summary Of Common Problems Of Screw Packaging Machine

The screw packaging machine is a device that many factories and technicians and friends often use. Due to the influence of the use time and debugging problems, even the machines that do not often have problems will inevitably have some minor problems. For different problems, we made a screw today. Summary of common problems of packaging machine, hope to help everyone!

Screw packing machine

1. Grinding and sealing problems:

Poor sealing of tools for screw packaging machines is a common problem, and it should be viewed from simple to difficult. First look at the temperature. Is the temperature higher than the sealing temperature of the packaging plastic film? If so, check whether the working pressure of the packaging machine is normal. If there is no problem, it may be the gear bite problem or the working pressure is abnormal.

In response to this problem, we must first consider temperature, and secondly, consider whether there is a lack of power. If there is no problem with the two, correct the occlusal relationship of the abrasive tool again based on one side.

2. Optical issues

Optical problems mainly bring about different lengths of packaging bags. To solve this problem, check the film. When it is running, check whether the boundary position of the optical eye is stained with floating dust? Is the sensitivity of the optical eye normal? Is the film dirty? If so, align the position where there is no dust and spots and try again. If not, just change to another film!

3. The temperature suddenly rises

The first step is to check whether the safety tube of the screw packaging machine is damaged and whether the relay components are easy to use? This step can be done with a multimeter, or an electronic probe.

Next, check whether the wiring is active. Take a heater wire to check the resistance. If you don't have a multimeter, don't be afraid of trouble. Just try one by one and do the elimination.

The screw packaging machine is a good partner and helper for packaging work. We must pay attention to daily maintenance and inspections to prevent sudden small problems from causing everyone's daily production to fail!